Pelikan DNDC540 User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
Digital Day&Night Dome Camera
22
󰥒 Camera Operation
The level of background noise in low light decreases automatically as the
level of gain changes.
1. Position the cursor to point to 'DNR' on the SETUP menu by using the
UP and DOWN buttons.
2. Select the value required by pressing the LEFT or RIGHT button.
󰦂 OFF : There is no reduction in noise level.
󰦂 LOW : There is a small reduction in noise level with almost no
ghost image
.
󰦂 MIDDLE : The most effective mode. There is a sufficient reduction in
noise levels without causing significant ghosting.
󰦂 HIGH : The level of noise is reduced greatly, however there is an
increase in ghosting.
SENS UP helps maintain a bright, clear screen image by automatically
detecting changes in the level of light in low light level conditions.
DNR (Digital Noise Reduction)
SENS UP (Low Illuminance)
SETUP
LENS MANUAL
SHUTTERESC
WHITE BAL. ATW
BACKLIGHT OFF
AGC LOW
DNR LOW
SENS-UP OFF
SPECIAL
When AGC is turned off, DNR does not operate.
Note
23
Digital Day&Night Dome Camera
1. Position the arrow to point to 'SENS UP' on the SETUP menu by using the
UP and DOWN buttons.
2. Select the value required by pressing the LEFT or RIGHT button.
󰦂 AUTO : Low light level automatic mode.
󰦂 OFF : The function does not operate
.
3. Press the SET button when all the settings are complete.
SETUP
LENSMANUAL
SHUTTERESC
WHITE BAL. ATW
BACKLIGHT OFF
AGC LOW
DNR LOW
SENS-UP OFF
SPECIAL
EXIT
• When SHUTTER is in the manual or flk mode, SENS UP does not operate.
• When AGC is turned off, SENS UP does not operate.
Note
• The maximum storage magnification in low light level movement situations
can be adjusted by pressing the SET button in 'AUTO' mode.(X2~X128)
• As the magnification increases the screen gets brighter; however the after
image also increases.
• If storage magnification is increased while SENS UP is operational, it may
cause noise and spots may appear; this is normal.
Note
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments